TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 959 of 1760
CONTINUITY TEST (1) Remove two screws, lockwashers, RH composite taillight assembly, and terminal lug TL21 from right taillight carrier. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL21. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3095 from terminal lug TL21 to terminal lug TL92 (para 2-40) or replace rear lights cable assembly (para 7-75). (6) If continuity is present, replace RH composite taillight assembly (para 7-32). (7) Install terminal lug TL21, and RH composite taillight assembly on right taillight carrier with two lockwashers and screws. Change 1 2-593 TM 9-2320-365-20-1 (8) Connect connector P64 to RH composite taillight assembly. (9) Install RH composite taillight lamp in socket. (10) Install preformed packing and cover on RH composite taillight assembly with six screws.