Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download

Page 933 of 1760

CONTINUITY TEST (1) Remove nut, lockwasher, terminal lug TL20, and lockwasher from RH marker light screw. Discard lockwashers. (2) Connect positive (+) probe of multimeter to terminal lug TL20. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3095 from terminal lug TL20 to terminal lug TL21 (para 2-40) and go to step 6 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (5) If continuity is present, replace RH marker light and go to step 6 of this fault if required. (6) Install lockwasher, terminal lug TL20, lockwasher, and nut on RH marker light screw. (7) Connect RH marker light connector to connector P89. Change 1 2-584.47 TM 9-2320-365-20-1