TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 929 of 1760
CONTINUITY TEST (1) Remove nut, lockwasher, terminal lug TL16, and lockwasher from LH marker light screw. Discard lockwashers. (2) Connect positive (+) probe of multimeter to terminal lug TL16. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3094 from terminal lug TL16 to terminal lug TL18 (para 2-40) and go to step 30 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (5) If continuity is present, replace LH marker light (para 7-38) and go to step 30 of this fault if required. (6) Install lockwasher, terminal lug TL16, lockwasher, and nut on LH marker light screw. (7) Connect LH marker light connector to connector P86. Change 1 2-584.43 TM 9-2320-365-20-1