Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download

Page 925 of 1760

CONTINUITY TEST (1) Remove nut, lockwasher, terminal lug TL19, and lockwasher from RH side marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL19. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3095 from terminal lug TL19 to terminal lug TL20 (para 2-40) and go to step 6 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (6) If continuity is present, replace RH side marker light (para 7-31) and go to step 5 of this fault if required. (7) Install lockwasher, terminal lug TL19, lockwasher, and nut on RH side marker light screw. (8) Connect RH side marker light connector to connector P88. Change 1 2-584.39 TM 9-2320-365-20-1