TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 919 of 1760
CONTINUITY TEST (1) Remove nut, lockwasher, terminal lug TL20 and lockwasher from RH rear marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL20. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3095 from terminal lug TL20 to terminal lug TL21 (para 2-40) and go to step 6 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (6) If continuity is present, repair wire 489 from splice E15 to splice E17 (para 2-40) and go to step 6 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (7) Install lockwasher, terminal lug TL20, lockwasher, and nut on RH rear marker light screw. Change 1 2-584.33 TM 9-2320-365-20-1