TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 917 of 1760
CONTINUITY TEST (1) Remove nut, lockwasher, terminal lug TL15, and lockwasher from LH side marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL15. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3094 from terminal lug TL15 to terminal lug TL16 (para 2-40) and go to step 5 of this fault if required or replace rear lights cable assembly (para 7-75) and go to step 1 of this fault. (6) If continuity is present, replace LH side marker light (para 7-31) and go to step 5 of this fault if required. (7) Install lockwasher, terminal lug TL15, lockwasher, and nut on LH side marker light screw. (8) Connect LH side marker light connector to connector P85. Change 1 2-584.31 TM 9-2320-365-20-1