TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 895 of 1760
CONTINUITY TEST (1) Remove two screws and lens cover from RH rear marker light base. (2) Remove RH rear marker light lamp from socket. (3) Set multimeter to ohms. (4) Check continuity through RH rear marker light lamp and note reading on multimeter. (5) If continuity is not present, replace RH rear marker light lamp (para 7-31) and go to step 6 of this fault if required. (6) Install RH rear marker light lamp in socket. (7) Install lens cover on RH rear marker light base with two screws. Change 1 2-584.9 TM 9-2320-365-20-1