TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 798 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-532 2-532 2-532 2-532 2-532 YES 7. Is continuity present between connector P18 terminals 2 and 3? If 12 vdc is not present, headlight dimmer control is faulty. If 12 vdc is present, wire 16A is faulty. NO KNOWN INFO TEST OPTIONS REASON FOR QUESTION POSSIBLE PROBLEMS Faulty turn signal switch. Faulty dashboard cable assembly. Continuity Test or STE/ICE-R #91 YES NO 8. Faulty dashboard cable assembly. Faulty front lights cable assembly. Is continuity present between relay K8 terminal 30 and connector J27-6? If continuity is not present, wire 17 in dashboard cable assembly is faulty. If continuity is present, wire 17 in front lights cable assemby is faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R#91 REASON FOR QUESTION One headlight low beam illuminates. Headlight lamp OK. Front lights cable assembly OK. Relay K8 OK. Headlight high beams illuminate. Headlight lamp OK. Turn signal switch OK. Relay K8 OK. Replace turn signal switch (para 7-25). Repair wire 16A (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Repair wire 17 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Repair wire 17 (para 2-40) or replace front lights cable assembly (para 7-74). e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT)