TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 796 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-530 2-530 2-530 2-530 2-530 5. Is continuity present between relay K8 terminal 85 and a known good ground? YES If continuity is not present, wire 3053 is faulty. If continuity is present, relay K8 is faulty. NO Faulty dashboard cable assembly. Faulty relay K8. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION 6. Is 12 vdc present at connector P18-3? If 12 vdc is not present, wire 16A is faulty. YES WARNING Read WARNING on following page. NO Faulty turn signal switch. Faulty dashboard cable assembly. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Voltage Test or STE/ICE-R #89 REASON FOR QUESTION Headlight low beams illuminate. Headlight lamp OK. Front lights cable assembly OK. Turn signal switch OK. Headlight low beams illuminate. Headlight lamp OK. Front lights cable assembly OK. Repair wire 3053 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Replace relay K8 (para 7-9). Repair wire 16A (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT) e42. ONE OR BOTH HEADLIGHT HIGH BEAMS DO NOT ILLUMINATE (CONT)