TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 76 of 1760
TM 9-2320-365-20-1 CHAPTER 2 VEHICLE MAINTENANCE (CONT) Section V. MAINTENANCE PROCEDURES (CONT) 2-39. GENERAL INSPECTION INSTRUCTIONS ......................................... 2-2132 2-40. GENERAL REPAIR INSTRUCTIONS ............................................ 2-2132 2-41. GENERAL ASSEMBLY INSTRUCTIONS .......................................... 2-2133 2-42. GENERAL INSTALLATION INSTRUCTIONS ....................................... 2-2134 2-43. PREPARATION FOR STORAGE OR SHIPMENT INTRODUCTION ...................... 2-2134 2-44. PREPARATION FOR STORAGE OR SHIPMENT ................................... 2-2135 2-45. STORAGE MAINTENANCE PROCEDURES ....................................... 2-2135 Section I. REPAIR PARTS, TOOLS, SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT 2-1. COMMON TOOLS AND EQUIPMENT For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE), CTA 50-970, or CTA 8-100 as applicable to your unit. 2-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT For a listing of special tools, TMDE, and support equipment, refer to the Maintenance Allocation Chart (MAC), Appendix B, of this manual and to the Repair Parts and Special Tools List (RPSTL), TM 9-2320-365-24P. 2-3. REPAIR PARTS Mandatory replacement parts are listed in Appendix G. Repair parts are listed and illustrated in the RPSTL, TM 9-2320- 365-24P, covering Unit Maintenance repair parts and special tools for vehicle. 2-2 Change 1