TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 759 of 1760
CONTINUITY TEST (13) Tighten four screws to 6-10 lb-in. (1 N·m). (14) Connect batteries (para 7-48). (1) Loosen four captive screws in lamp mounting panel. (2) Remove lamp mounting panel from lighted indicator display. (3) Remove two front brake air indicator lamps from printed circuit board. (4) Set multimeter to ohms. (5) Check continuity through each front brake air indicator lamp and note reading on multimeter. (6) If continuity is not present, replace front brake air indicator lamps (para 7-16). (7) If continuity is present, replace lighted indicator display (para 7-16). (8) Install two front brake air indicator lamps in printed circuit board. (9) Install lamp mounting panel in lighted indicator display. (10) Tighten four captive screws in lamp mounting panel. (11) Connect lighted indicator display connector to connector PX7. (12) Position lighted indicator display in instrument panel assembly with four screws. Change 1 2-497 TM 9-2320-365-20-1