TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 751 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-491 2-491 2-491 2-491 2-491 CONTINUITY TEST (1) Remove four screws from lighted indicator display. (2) Remove lighted indicator display from instrument panel assembly. (3) Disconnect connector PX7 from lighted indicator display. (4) Loosen four captive screws in lamp mounting panel. (5) Remove lamp mounting panel from lighted indicator display housing. (6) Remove transmission temperature indicator lamps from printed circuit board. (7) Set multimeter to ohms. (8) Check continuity through each transmission temperature indicator lamp and note reading on multimeter. (9) If continuity is not present, replace transmission temperature indicator lamps (para 7-16). (10) If continuity is present, replace lighted indicator display (para 7-16). (11) Install transmission temperature indicator lamps in printed circuit board. (12) Install lamp mounting panel in lighted indicator display housing. (13) Tighten four captive screws in lamp mounting panel. (14) Connect lighted indicator display to connector PX7. (15) Position lighted indicator display in instrument panel assembly with four screws. (16) Tighten four screws to 6-10 lb-in. (1 N·m). (17) Connect batteries (para 7-48).