TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 729 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-469 2-469 2-469 2-469 2-469 CONTINUITY TEST (1) Remove personnel heater for access (para 18-9). (2) Disconnect connector P913 from connector J913. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to PX7-10. (5) Connect negative (-) probe of multimeter to J913-13 and note reading on multimeter. (6) If continuity is not present, repair wire 2021 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (7) Connect lighted indicator display to connector PX7. (8) Position lighted indicator display in instrument panel assembly with four screws. (9) Tighten four screws to 6-10 lb-in. (1 N·m). (10) Connect batteries (para 7-48).