TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 725 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-465 2-465 2-465 2-465 2-465 CONTINUITY TEST (1) Connect lighted indicator display to connector PX7. (2) Position lighted indicator display in instrument panel assembly with four screws. (3) Tighten four screws to 6-10 lb-in. (1 N·m). (4) Connect batteries (para 7-48). (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to connector J216-B. (7) Connect negative (-) probe of multimeter to connector J216-A. (8) Start engine (TM 9-2320-365-10). (9) Position PTO switch to on (TM 9-2320-365-10) and note reading on multimeter. (10) If continuity is not present, notify DS Maintenance. (11) If continuity is present, repair wire 3025 (para 2-40) or replace PTO cable assembly (para 7-77). (12) Position PTO switch to off (TM 9-2320-365-10). (13) Shut down engine (TM 9-2320-365-10). (14) Connect connector P216 to connector J216.