TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 719 of 1760
CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to terminal lug TL201. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3024 from terminal lug TL201 to terminal lug TL126 (para 2-40) or replace front lights cable assembly (para 7-74). (5) If continuity is present, replace low pressure transmitter (para 11-28). (6) Position front grille on cab with washer and screw. (7) Position two washers and screws in front grille. (8) Tighten screw to 48-60 lb-in. (5-7 N·m). (9) Tighten two screws to 24 lb-in. (3 N·m). (10) Install PDP in dashboard with three screws. (11) Install three washers and screws in PDP. (12) Install PDP cover (para 16-2). Change 1 2-459 TM 9-2320-365-20-1