TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 698 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-438 2-438 2-438 2-438 2-438 1. START YES Is continuity present between connector PX7-7 and a known good ground? Headlight high beams operate. NO Faulty dashboard cable assembly. Faulty lighted indicator display. If continuity is not present, wire 3021 is faulty. If continuity is present, lighted indicator display is faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION e29. TURN SIGNAL INDICATORS AND HIGH BEAMS ON INDICATOR DO NOT OPERATE INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (para 7-48). Personnel Required (2) Repair wire 3021 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Replace lighted indicator display (para 7-16). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) STE/ICE-R (Item 39, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) References TM 9-4910-571-12&P