TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 643 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-399 2-399 2-399 2-399 2-399 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Remove personnel heater for access (para 18-9). (2) Disconnect connector J913 from connector P913. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to connector P913-11. (5) Connect negative (-) probe of multimeter to ground. (6) Position main light switch to STOP LIGHT and PANEL BRIGHT (TM 9-2320-365-10) and note reading on multimeter. (7) If 12 vdc is not present, repair wire 1908 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (8) Position main light switch to OFF (TM 9-2320-365-10).