TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 551 of 1760
VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. (1) Start engine (TM 9-2320-365-10) and allow enough pressure to build in air tanks to cause steady tone audible alarm to cease. (2) Shut down engine (TM 9-2320-365-10). (3) Remove PDP cover (TM 9-2320-365-10). (4) Remove circuit breaker CB77 from PDP (para 7-9). (5) Remove instrument panel assembly for access (para 7-15). (6) Install circuit breaker CB77 on PDP (para 7-9). (7) Connect one end of electrical wire to terminal lug TL178. (8) Connect opposite end of electrical wire to ground. (9) Position master power switch to on (TM 9- 2320-365-10). (10) If troop transport audible alarm does not operate, replace audible alarm (para 7-35). (11) Position master power switch to off (TM 9- 2320-365-10). (12) Install PDP cover (TM 9-2320-365-10). WARNING Change 1 2-365 TM 9-2320-365-20-1