TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 549 of 1760
CONTINUITY TEST (1) Remove two screws, lockwashers, and terminal lugs TL164 and TL165 from troop transport alarm switch. Discard lockwashers. (2) Lift switch cover on troop transport alarm switch. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to one terminal of troop transport alarm switch. (5) Connect negative (-) probe of multimeter to second terminal of troop transport alarm switch. (6) Position troop transport alarm switch to on and note reading on multimeter. (7) If continuity is not present, replace troop transport alarm switch (para 20-80). (8) Install terminal lugs TL165 and TL164 on troop transport alarm switch with two lockwashers and screws. (9) Close switch cover on troop transport alarm switch. Change 1 2-363 TM 9-2320-365-20-1