TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 517 of 1760
J111. (12) Install PDP on dashboard with three washers and screws. (13) Install three screws in PDP. (14) Install PDP cover (TM 9-2320-365-10). Change 1 2-345 TM 9-2320-365-20-1 (1) Remove two protective caps, self-locking nuts, retaining ring, and speedometer from instrument panel assembly. Discard self- locking nuts. (2) Note position of speedometer dip switches. Refer to Table 2-8.5. Speedometer Dip Switch Settings. (3) If speedometer dip switch setting(s) are incorrect, correct speedometer dip switch setting(s) (para 7-14). (4) If speedometer dip switch settings are correct, replace speedometer (para 7-14). (5) Position speedometer in instrument panel assembly with retaining ring and two self- locking nuts. (6) Tighten two self-locking nuts to 9 lb-in. (1 N·m). (7) Install two protective caps on speedometer. (8) Connect connector PX8 to speedometer connector. (9) Connect connector clamp on speedometer connector. (10) Install instrument panel assembly (para 7-10). Up Up Up Up Up Up Down Down Down Down 1 2 3 4 5 6 7 9 8 10 Switch Number Switch Setting Table 2-8.5. Speedometer Dip Switch Settings (11) Connect connector P111 to connector