Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download

Page 503 of 1760

(1) Check if vehicle is equipped with WTEC II Transmission ECU Pushbutton Shift Selector (TEPSS). (2) If pushbutton shift selector is not mounted with four screws and is not equipped with a filter cover, go to step 12 of this fault. (1) Position master power switch to on (TM 9- 2320-365-10). (2) Observe if VOLTS gage indicator needle moves (TM 9-2320-365-10). (3) If VOLTS gage indicator needle does not move, repair wire 3020 from connector PX8 pin 1 to connector PX10 pin 1 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (4) Position master power switch to off (TM 9- 2320-365-10). Change 1 2-337 TM 9-2320-365-20-1