TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 448 of 1760
e6. ENGINE CRANKS BUT DOES NOT START (CONT) KNOWN INFO TEST OPTIONS REASON FOR QUESTION YES 8. Is 24 VDC present at terminal board TB1 position 59? WARNING Read WARNING on following page. If 24 VDC is not present, wire 1690 is faulty. If 24 VDC is present, wire 1462 is faulty. Voltage Test or STE/ICE-R Test #89 NO Repair wire 1462 from terminal board TB1 position 59 on PDP to relay K19 socket 87A on PDP (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Fuel quantity OK. Fuel/water separator primed. Air cleaner hose or tube OK. Start inhibit pushbutton switch OK. Relay K19 OK. POSSIBLE PROBLEMS Faulty dashboard cable assembly. Faulty engine control cable assembly. TM 9-2320-365-20-1 2-306.4 Change 1 Repair wire 1690 from terminal board TB1 position 61 on PDP to circuit breaker CB79 socket 5 on PDP (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11).