TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 446 of 1760
KNOWN INFO 7. TEST OPTIONS REASON FOR QUESTION CAUTION Read CAUTION on following page. Continuity Test or STE/ICE-R Test #91 Repair wire 54 from connector P31 socket 14 to terminal lug TL28 (para 2-40) or replace engine control cable assembly (para 7-72). Is continuity present from relay K19 socket 87A to connector J31 pin 14? Fuel quantity OK. Fuel/water separator primed. Air cleaner hose or tube OK. Start inhibit pushbutton switch OK. Relay K19 OK. POSSIBLE PROBLEMS Faulty dashboard cable assembly. Faulty engine control cable assembly. If continuity is not present, wire 54 from relay K19 socket 87A on PDP to connector J31 pin 14 is faulty. If continuity is present, wire 54 from connector P31 socket 14 to terminal lug TL28 is faulty. YES NO Repair wire 54 from relay K19 socket 87A on PDP to connector J31 pin 14 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). TM 9-2320-365-20-1 2-306.2 Change 1 e6. ENGINE CRANKS BUT DOES NOT START (CONT)