TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 429 of 1760
CONTINUITY TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING (1) Remove nut and terminal lugs TL39 and TL10 from battery 24 VDC cable. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL39. (4) Connect negative (-) probe of multimeter to terminal lug TL37 and note reading on multimeter. (5) If continuity is not present, replace battery to 200 AMP terminal block 24 VDC cable assembly (para 20-64). (6) Position terminal lugs TL36 and TL37 on left 24V BAT terminal stud on 200 AMP terminal block with washer, lockwasher, and nut. (7) Tighten nut to 15-19 lb-ft (21-25 N.m). (8) Install terminal lugs TL10 and TL39 on battery 24 VDC cable with nut. Change 1 2-274.19 TM 9-2320-365-20-1