TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 419 of 1760
VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING (1) Remove circuit breaker CB30 from PDP. (2) Set multimeter to volts DC. (3) Connect positive (+) probe of multimeter to circuit breaker CB30 socket 1 on PDP. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If 24 VDC is not present, Repair wire 1602 from terminal X1on PDP to bus bar X4 on PDP (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (6) If 24 VDC is present, replace bus bar X4 on PDP or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (7) Install circuit breaker CB30 in PDP. (8) Install PDP cover (para 16-2). TM 9-2320-365-20-1 Change 1 2-274.9