TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 315 of 1760
VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING (1) Install relay K1 in PDP. (2) Remove kick panel (para 16-3). (3) Remove circuit breaker CB35 from PDP. (4) Remove eight screws, washers, cover, and metal seal ring from VIM. Discard metal seal ring. (5) Remove neutral start relay from VIM. (6) Set multimeter to volts DC. (7) Connect positive (+) probe of multimeter to neutral start relay socket 87 on VIM. (8) Connect negative (-) probe of multimeter to ground. (9) Install circuit breaker CB35 in PDP and note reading on multimeter. (10) If 24 VDC is not present, go to step 41 of this fault. (11) Remove circuit breaker CB35 from PDP. Change 1 2-213 TM 9-2320-365-20-1