TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 291 of 1760
CONTINUITY TEST (1) Remove relay K24 from PDP. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to relay K24 socket 87 on PDP. (4) Connect negative (-) probe of multimeter to ground. (5) Press starter pushbutton (TM 9-2320-365-10) and note reading on multimeter. (6) If continuity is not present, go to step 27 of this fault. Change 1 2-189 TM 9-2320-365-20-1