TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 271 of 1760
VOLTAGE TEST WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. (1) Set multimeter to volts DC. (2) Connect positive (+) probe of multimeter to terminal lug TL12. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 VDC is not present, replace battery to starter cable assembly (para 7-70). (5) If 24 VDC is present, repair wire 14 from terminal lug TL55 to terminal lug TL9 (para 2-40) or replace start and charging cable assembly (para 7-82). (6) Disconnect batteries (para 7-48). (7) Apply adhesive to auxiliary starter solenoid. (8) Apply adhesive to solenoid right terminal stud. (9) Connect batteries (para 7-48). (10) Lower cab (TM 9-2320-365-10). Change 1 2-169 TM 9-2320-365-20-1