TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 181 of 1760
WARNING (1) Remove plug from adapter fitting on inlet side of fuel filter base. (2) Prepare STE/ICE-R Test #50 (TM 9-4910-571- 12&P) to adapter fitting. (3) Start engine (TM 9-2320-365-10). (4) Perform STE/ICE-R Test #50 (TM 9-4910-571- 12&P). (5) Raise idle speed to 2000 rpm for 10 seconds. (6) Pressure should read between 39 psi and 58 psi. (7) Record test results. (8) Shut down engine (TM 9-2320-365-10). (9) If pressure is below 39 psi, notify DS Maintenance. Diesel fuel is flammable. If fuel is spilled, clean it up immediately. Failure to comply may result in serious injury or death to personnel. TM 9-2320-365-20-1 Change 1 2-100.5 PRESSURE TEST