TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1567 of 1760
E-20. DIMMER SWITCH TEST WIRE Fabricate the dimmer switch test wire according to the following steps. Refer to the following parts list for materials. Material Description National Stock Number Quantity Cut Length Wire, Electrical (M168678/14BKE9) 6145-01-229-4134 1 12 in (305 mm) Pin, Grooved, Headless (12258939-1) 5315-01-156-6314 1 Contact, Electrical (12258939-2) 5999-01-150-8808 1 a. Dimensions are in inches (millimeters). b. Cut a length of electrical wire approximately 12 in. (305 mm) long. c. Remove approximately 1/4 in. (6 mm) of insulation from each end of electrical wire. d. Crimp headless grooved pin on one end of electrical wire. e. Crimp electrical contact on opposite end of electrical wire. Change Change 1 E-21 E-21 TM 9-2320-365-20-1