TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1557 of 1760
E-6. M1079 BLACKOUT SHIELD SEALS Fabricate the M1079 blackout shield seals according to the following steps. Refer to the following parts list for materials. Description Material Part Number CAGE Code Cut Length Blackout Shield Header Seal 942P00001 0SHR6 28-3/4 in. (730 mm) Blackout Shield Jamb Seal (van body serial numbers 001 through 190) 942P00001 0SHR6 63-3/8 in. (1610 mm) Blackout Shield Jamb Seal (van body serial number 191 and higher) 942P00001 0SHR6 33 in. (838 mm) a. Dimensions are in inches (millimeters). b. Cut seal material to the specified length using a fine-toothed hacksaw or other suitable cutting tool. E-7. M1079 DOOR GASKETS Fabricate the M1079 door gaskets according to the following steps. Refer to the following parts list for materials. Description Material Part Number CAGE Code Cut Length LH Door Gasket 12416417 19207 214 in. (5435 mm) RH Door Gasket 12416417 19207 197 in. (5004 mm) a. Dimensions are in inches (millimeters). b. Cut seal material to the specified length using a fine-toothed hacksaw or other suitable cutting tool. c. Glue ends of gasket to each other using adhesive MIL-A-46106 GP1TY1 (Item 11, Appendix D). E-11 E-11 TM 9-2320-365-20-1