TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1511 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. Batteries can explode from a spark. Battery acid is harmful to skin and eyes. Always wear eye protection and rubber gloves when working with batteries. VOLTAGE TEST (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to terminal in right side of fuse holder. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 vdc is not present, repair wire from right side of fuse holder to BT2-E1 (para 2-40) or replace battery tester (para 7-45). (5) If 24 vdc is present, replace battery tester (para 7-45). (6) Install fuse in battery tester fuse holder. (7) Close battery tester fuse holder. (8) Install battery box cover (TM 9-2320-365-10). 2-1085/(2-1086 Blank) 2-1085/(2-1086 Blank) 2-1085/(2-1086 Blank) 2-1085/(2-1086 Blank) 2-1085/(2-1086 Blank)