TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1500 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-1074 2-1074 2-1074 2-1074 2-1074 YES NO Is continuity present between relay K19 terminal 85 and a known good ground? KNOWN INFO 4. TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION If continuity is not present, wire 3016 is faulty. If continuity is present, relay K19 is faulty. Engine will start after start inhibit pushbutton switch is pressed. Start inhibit pushbutton switch OK. Wire 1463 OK. Wire 1637 OK. POSSIBLE PROBLEMS Faulty dashboard cable assembly. Faulty relay K19. Repair wire 3016 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Replace relay K19 (para 7-9). e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT) e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT) e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT) e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT) e96. START INHIBIT PUSHBUTTON DOES NOT OPERATE (CONT)