TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1487 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-1061 2-1061 2-1061 2-1061 2-1061 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Raise cab (TM 9-2320-365-10). (2) Disconnect connector clamp from fuel/water separator. (3) Disconnect connector P33 from fuel/water separator. (4) Set multimeter to volts dc. (5) Connect positive (+) probe of multimeter to connector P33-2. (6) Connect negative (-) probe of multimeter to ground. (7) Position master power switch to on (TM 9-2320-365-10) and note reading on multimeter. (8) If 24 vdc is not present, go to step 3 of this fault. (9) Position master power switch to off (TM 9-2320-365-10).