TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1453 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-1027 2-1027 2-1027 2-1027 2-1027 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J7-3. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3099 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10). (5) If continuity is present, replace WTEC II ECU dimmer module (para 7-13). (6) Connect connector J7 to WTEC II ECU dimmer module. (7) Install PDP on dashboard with three screws. (8) Install three washers and screws in PDP. (9) Install kick panel (para 16-3).