TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1449 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-1023 2-1023 2-1023 2-1023 2-1023 CONTINUITY TEST (1) Remove three screws and washers from PDP. (2) Remove three screws from PDP. (3) Lift PDP outward to gain access. (4) Disconnect connector J7 from WTEC II ECU dimmer module. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to connector J7-4. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is not present, repair wire 158 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10).