TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1439 of 1760
VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING (1) Lift dust boot from terminal lug TL2. (2) Set multimeter to volts DC. (3) Connect positive (+) probe of multimeter to terminal lug TL2. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If 24 VDC is not present, replace 100 AMP alternator to reverse polarity relay 24 VDC cable (para 7-66) or replace 200 AMP alternator to terminal block 12 VDC cable (para 20-61). (6) Position dust boot on terminal lug TL2. (7) Disconnect batteries (para 7-48). (8) Lower cab (TM9-2320-365-10). (9) Install relay K11 in PDP. (10) Install PDP cover (para 16-2). (11) Connect batteries (para 7-48). Change 1 2-1016.7 TM 9-2320-365-20-1