TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1409 of 1760
TM 9-2320-365-20-1 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING Change 2 2-993 (1) Remove personnel heater for access (para 18-9). (2) Disconnect connector J913 from connector P913. (3) Set multimeter to volts DC. (4) Connect positive (+) probe of multimeter to connector J913-5. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-365-10) and note reading on multimeter. (7) If 24 VDC is not present, repair wire 1925 (para 2-40) or replace WTEC III dashboard cable assembly (para 7-11). (8) Position master power switch to off (TM 9-2320-365-10).