TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1395 of 1760
TM 9-2320-365-20-1 CONTINUITY TEST Change 2 2-979 (1) Remove kick panel (para 16-3). (2) Disconnect connector P210 from connector J210. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P210-4. (5) Disconnect connector P217 from PTO. (6) Connect negative (-) probe of multimeter to connector P217-B and note reading on multimeter. (7) If continuity is not present, repair wire 2019 (para 2-40) or replace PTO cable assembly (para 7-77). (8) Connect connector P217 to PTO. (9) Connect connector P210 to connector J210.