TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1328 of 1760
KNOWN INFO TEST OPTIONS REASON FOR QUESTION YES Continuity Test or STE/ICE-R Test #91 Is continuity present from connector P84 socket A to ground? If continuity is not present, wire 3032 in start and charging cable assembly is faulty. NO Repair wire 3032 from connector P84 socket A to terminal lug TL85 (para 2-40) or replace start and charging cable assembly (para 7-82). TM 9-2320-365-20-1 22. TEST OPTIONS REASON FOR QUESTION YES NO Continuity Test or STE/ICE-R Test #91 Replace CTIS cable assembly (para 7-53). Is continuity present from connector P111 pin F to connector P110 socket T? If continuity is not present, CTIS cable assembly is faulty. KNOWN INFO 23. POSSIBLE PROBLEMS Faulty start and charging cable assembly. Faulty WTEC II / WTEC III dashboard cable assembly. Faulty CTIS cable assembly. VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. POSSIBLE PROBLEMS Faulty start and charging cable assembly. Faulty WTEC II / WTEC III dashboard cable assembly. Faulty CTIS cable assembly. e82. CENTRAL TIRE INFLATION SYSTEM (CTIS) DOES NOT OPERATE (CONT) 2-918.14 Change 2