TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1279 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-883 2-883 2-883 2-883 2-883 CONTINUITY TEST (1) Disconnect connector P6 from horn. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector P6. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3035 (para 2-40) or replace front lights cable assembly (para 7-74). (6) If continuity is present, replace horn (para 7-44). (7) Connect connector P6 to horn. (8) Position front grille on cab with washer and screw. (9) Position two washers and screws in front grille. (10) Tighten screw to 48-60 lb-in. (5-7 N·m). (11) Tighten two screws to 24 lb-in. (3 N·m).