TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1269 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-873 2-873 2-873 2-873 2-873 CONTINUITY TEST (1) Disconnect connector J2 from connector P2. (2) Disconnect windshield wiper ECU from connector PX21. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector PX21-3. (5) Connect negative (-) probe of multimeter to connector J2-4 and note reading on multimeter. (6) If continuity is not present, repair wire 1916 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (7) If continuity is present, replace windshield wiper ECU (para 7-62). (8) Connect windshield wiper ECU to connector PX21. (9) Connect connector P2 to connector J2. (10) Install PDP on dashboard with three screws. (11) Install three washers and screws in PDP. (12) Install PDP cover (para 16-2).