TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1261 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-865 2-865 2-865 2-865 2-865 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Remove PDP cover (para 16-2). (2) Disconnect windshield wiper ECU from connector PX21. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to connector PX21-6. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-365-10). (7) Position windshield wiper switch to intermittent (TM 9-2320-365-10) and note reading on multimeter. (8) If 24 vdc is not present, go to step 5 of this fault. (9) Position windshield wiper switch to off (TM 9-2320-365-10). (10) Position master power switch to off (TM 9-2320-365-10).