TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1253 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-857 2-857 2-857 2-857 2-857 CONTINUITY TEST CONTINUITY TEST (1) Disconnect connector J2 from connector P2. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector J2-4. (4) Connect negative (-) probe of multimeter to connector PX21-3 and note reading on multimeter. (5) If continuity is not present, repair wire 1916 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (6) Connect windshield wiper ECU to connector PX21. (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector P2-4. (3) Connect negative (-) probe of multimeter to connector PX22-2 and note reading on multimeter. (4) If continuity is not present, replace windshield wiper EMI cable (para 7-61). (5) If continuity is present, replace windshield wiper ECU (para 7-62). (6) Connect connector P2 to connector J2. (7) Connect connector PX22 to windshield wiper motor. (8) Install PDP on dashboard with three screws. (9) Install three washers and screws in PDP. (10) Install PDP cover (para 16-2).