TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1245 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-849 2-849 2-849 2-849 2-849 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Disconnect connector P25 from connector J25. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector P25-2. (4) Connect negative (-) probe of multimeter to ground. (5) Position master power switch to on (TM 9-2320-365-10). (6) Press windshield washer switch (TM 9-2320-365-10) and note reading on multimeter. (7) If 24 vdc is not present, repair wire 1424 (para 2-40) or replace front lights cable assembly (para 7-74). (8) If 24 vdc is present, replace windshield washer pump EMI cable (para 7-60). (9) Position master power switch to off (TM 9-2320-365-10). (10) Connect connector P25 to connector J25. (11) Close left cab step tread (TM 9-2320-365-10).