TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1091 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-705 2-705 2-705 2-705 2-705 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Raise cab (TM 9-2320-365-10). (2) Disconnect connector P23 (LH composite front light assembly) or P9 (RH composite front light assembly) from composite front light assembly connector. (3) Lower cab (TM 9-2320-365-10). (4) Connect positive (+) probe of multimeter to connector P23 (LH composite front light assembly) or P9 (RH composite front light light assembly). (5) Connect negative (-) probe of multimeter to ground. (6) Position main light switch to STOPLIGHT (TM 9-2320-365-10). (7) Position turn signal switch to left turn or right turn position (TM 9-2320-365-10) and note reading on multimeter. (8) If 12 vdc is not present, go to step 4 of this fault. (9) Position turn signal switch to off (TM 9-2320-365-10). (10) Position main light switch to OFF (TM 9-2320-365-10). (11) Raise cab (TM 9-2320-365-10). (12) Connect connector P23 (LH composite front light assembly) or P9 (RH composite front light assembly) to composite front light assembly connector.