Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download

Page 1033 of 1760

(1) Remove kick panel (para 16-3). (2) Remove seven screws and washers from cover. (3) Remove screw, washer, cover, and nut from WTEC II VIM. (4) Remove REVERSE WARNING relay from WTEC II VIM. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to REVERSE WARNING relay terminal 86. (7) Connect negative (-) probe of multimeter to REVERSE WARNING relay terminal 85 and note reading on multimeter. (8) If continuity is not present, replace REVERSE WARNING relay in WTEC II VIM (para 8-6). (9) Install REVERSE WARNING relay in WTEC II VIM. (10) Install cover on WTEC II VIM with nut, washer, and screw. (11) Install seven washers and screws in cover. CONTINUITY TEST Change 1 2-647 TM 9-2320-365-20-1