TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 1013 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-627 2-627 2-627 2-627 2-627 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect warning light connector from connector J62. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector J62-B. (4) Connect negative (-) probe of multimeter to ground. (5) Position main light switch to SER DRIVE (TM 9-2320-365-10). (6) Position warning light switch to on (TM 9-2320-365-10) and note reading on multimeter. (7) If 12 vdc is not present, go to step 3 of this fault. (8) Position warning light switch to off (TM 9-2320-365-10). (9) Position main light switch to OFF (TM 9-2320-365-10).