TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download

Page 17 of 836

TM 9-2320-365-10 o Ensure that ground cable terminal makes good metal-to-metal contact with bare metal on van body. If required, scrape contact area clean of dirt, paint, or rust. Failure to comply may result in serious injury or death to personnel or damage to equipment. Use caution when entering or leaving van. Failure to comply may result in serious injury or death to personnel. Power source must be turned off before disconnecting power cable. Failure to comply may result in injury to personnel or damage to equipment. Ensure that engine is not running before disconnecting circuit breaker box NATO connector from vehicle NATO connector. Failure to comply may result in injury to personnel. Light Material Handling Crane (LMHC) boom and winch weighs approximately 110 lbs (50 kgs). The aid of an assistant is required to remove LMHC boom and winch. Failure to comply may result in injury to personnel. Light Material Handling Crane (LMHC) mast weighs approximately 110 lbs (50 kgs). Use the aid of an assistant to remove mast from cargo bed pocket. Failure to comply may result in injury to personnel. Light Material Handling Crane (LMHC) boom and winch weighs approximately 110 lbs (50 kg). The aid of an assistant is required to install boom and winch. Failure to comply may result in injury to personnel. WARNING WARNING WARNING WARNING WARNING WARNING WARNING