TM-9-2320-365-10 LMTV Operator Manual M1078 Series Download
Page 731 of 836
TM 9-2320-365-10 3-14. REAR SPRING BRAKE CAGING This task covers: a. Caging b. Uncaging c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (para 2-21f). Tools and Special Tools Goggles, Industrial (Item 24, Appendix B) (366 number, add to 365, Appendix B) Tools and Special Tools (Cont) Wrench, Adjustable, 8 in. (Item 16, Appendix B) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Caging. NOTE To cage brakes, apply caging procedure to both top and bottom spring brake chambers. (1) Remove nut (1) and washer (2) from caging bolt (3). (2) Remove caging bolt (3) from caging bolt holder (4). Change 1 3-157